Gateway & AP – Set-Up Guide
Fields for Configuring the Gateway

To help you configure your gateway, HSNM is supplied with a gateway already completed with default values.
In the Wireless section, the Use Wireless field is enabled and the SSID is already defined as shown Figure Use Wireless

Figure Use Wireless

Enable Use Wireless only if you have a wireless card in your MikroTik gateway.

The fields in the Hotspot session are already preconfigured with an IP address, network mask, DNS IP address, first and last IP address for the DHCP address pool and DHCP lease time as shown Figure Guest Interfaces and Figure Guest Network

Figure Guest Interfaces
Figure Guest Network

Step 1

If you don’t want to use the default values, you need to complete all the fields related to the hotspot (SSID, IP address, the DHCP pool, etc..).

Step 2

Click the Save button on the top right of the page.

HSNM offers you two options for configuring your MikroTik: automatic and manual configuration.

Select the Automatic Configuration only if you can enter into your MikroTik an IP address that HSNM can reach.