PPPoE Gateway – Set-Up Guide
About this Guide

The manual is intended to provide you with some steps that are required to configure a PPPoE Gateway in order it can be interfaced to the HSNM. The gateway must have at least 2 interfaces (1 Ethernet + 1 Ethernet), where one ethernet interface will be connected to the existing network, while on the other interface you have to configure the PPPoE Server.

Ethernet Networking Skills

The installer needs to have the ability to configure IP addressing on a PC and to set up and control products using a web browser interface.

Training

The installer needs to have basic knowledge about network installation, TCP/IP protocol and virtual environment. The specific requirements, applicable to the HSNM, must be gained by reading this user guide and by performing sample setups and test at own lab before live deployments.

Audience

This manual is primarily for network and system administrators who are implementing HSNM Hotspot Manager to provision guest access on their networks.
The installer needs to have basic knowledge about network installation, TCP/IP protocol and virtual environment. The specific requirements, applicable to HSNM, must be gained by reading this manual and by performing setups and tests before live deployments.
Purpose

Purpose

The scope of this document includes all the information required to configure and administer HSNM Hotspot Manager.