PPPoE Gateway – Set-Up Guide
Configuring HSNM

First of all, you have to configure your HSNM on your network.
From the top-left sidebar, click Admin, select System Setting and configure your network. Click the Save button on the top right of the page.
Then click the  General Options menu and configure the general options. Click the Save button on the top right of the page.

For further and detailed information, please refer to the Admin Manual

Adding a New Gateway

HSNM is supplied with an existing branch structure (a Reseller, a Manager, a Domain and a Gateway).
You can create an additional branch structure by using the following steps.

Step 1

In the System dropdown, click Add Reseller, enter the details required and click the Save button on the top right of the page.

Step 2

In the Reseller dropdown, click Add Manager, enter the details required and click the Save button on the top right of the page.

Step 3

In the Manager dropdown, click Add Domain, enter the details required and click the Save button on the top right of the page.

Step 4

In the Domain dropdown, click Add Gateway, enter the details required and click the Save button on the top right of the page.

In the domain you need to add a product in the Products for the Domain section.
Your domain must be with “PPPoE” authentication mode

Once you click the Add Gateway menu, the “Add or edit a gateway (PPPoE)” page will appear.

In the General Data, select the Hardware Type of your gateway.

Based on the hardware type you select (MikroTik, Mikrotik with Flash or Other ), follow the dedicated configuring section described in the following paragraphs.

Only in case you have selected a MikroTik Router, the “Fields to Configure the Gateway” dropdown will appear and you have to follow the steps described in Configuring Your MikroTik Gateway.