Connecting the Printer on a Network
It is possible to configure the printer in two ways: through network connection cable; using wireless connection.
Connection via Cable
Connect the printer via cable to a network with active DHCP in order an IP address is assigned automatically.
Connection via Wireless
The printer is designed to connect to WiFi networks with encryption type WPA. To connect the printer to the network, perform the following steps:
- Switch on the printer and press the “CONFIRM” on the top right of the printer
- Click the down arrow until you get to “Wireless LAN” and press the green button “OK” on the bottom right of the printer.
- Select “Scan networks” and press the green “OK” button to confirm.
- Wait for the detection of WiFi networks, select the desired network and press the green “OK” button.
- Enter the password. To switch between the numeric keypad to the uppercase or lowercase alphanumeric, press #.
- Press the green “OK” button and wait the connection.
- If everything is ok, you’ll receive a message “Connection successful”.
If after about a minute, you are displayed the “Unable to get IP. Please check the router” message, it may mean that you are trying to connect to a non WPA network (e.g.: WEP) or the DHCP is not active.
